Name: XKDE-01455 XKDE01455 Solenoid Valve for R210LC-7 Excavator
Brand: GUANGZHOU JIAJUE TRADING CO.,LTD
SKU: R210LC-7
Price: 25 USD
Availability: InStock

Detail Information

Highlight:

R210LC-7 excavator solenoid valve

XKDE01455 excavator valve

excavator solenoid valve replacement

Product Description

XKDE-01455 XKDE01455 Solenoid Valve for R210LC-7 Excavator

Product Overview

XKDE-01455 XKDE01455 replacement part specifically designed for R210LC-7 Excavator models.

Product Specifications

Product Name	Solenoid Valve
Part Number	XKDE-01455
Brand Name	JIAJUE
Model Compatibility	R210LC-7
Condition	New
Availability	Rich Stock
Approximate Weight	0.5KG
Size (per unit)	12cm x 8cm x 5cm
Delivery Time	Usually delivered within 1-3 days after payment

Product Images

Frequently Asked Questions

Q1: How do I install my fuel injector after purchasing it?

Please refer to the "Step-by-Step Installation Guide" on our product details page, which contains detailed installation instructions.

Q2: What precautions should I take before installing my fuel injector?

The installation environment must be dust-free; lubricate the O-ring with clean machine oil before installation to prevent oil leakage; and ensure the O-ring is installed correctly.

Q3: Why is my engine still unusable after replacing the fuel injector?

This is commonly due to air trapped in the high-pressure oil rail. Cycle the engine in short bursts (no more than 30 seconds) to purge air. It may take several attempts to stabilize pressure.

Q4: Is my device compatible with this part number of fuel injectors?

If unsure about compatibility, please provide your Engine Serial Number (ESN) for free verification.

Q5: How to determine if your fuel injectors need replacing?

Cylinder Cut-out Test: Using diagnostic software (ET), shut off cylinders one by one and observe engine speed fluctuations to locate faulty cylinders.
Fuel Rail Pressure Test: Check for internal leaks preventing system from building critical starting pressure.
Back-leakage Test: Excessive back-leakage indicates severe wear of internal control valve assembly.
Visual Inspection: Inspect fuel injector nozzles for carbon buildup, blockage, or corrosion.

Q6: How long will it take to receive my package after I make the payment?

Delivery time depends on your country, region, and customs clearance. Contact us with your address and postal code for shipping costs and estimated delivery time.

Step-by-Step Installation Guide

Pro-Tip: HEUI (Hydraulic Electronic Unit Injection) systems are extremely sensitive to contamination. A single speck of dust can cause premature failure.

1. Preparation: Clean the injector bores thoroughly. Ensure there is no carbon debris, old O-rings, or fuel/oil residue at the bottom of the seat. Inspect the injector sleeve for any signs of pitting or erosion.

2. Lubrication: Apply clean engine oil to the three O-rings and the backup rings.

Never use grease. Only use clean engine oil to ensure the seals slide in without tearing.

3. Seating the Injector: Push the injector down firmly by hand until you feel it "seat." Install the hold-down clamp and bolt.

4. Torque Specifications: Tighten the bolt to 30 N⋅m±7 N⋅m (22 lb-ft).

Over-tightening can crack the injector body; under-tightening causes combustion gas leakage.

5. Trim Code Programming: Locate the 6-digit alphanumeric code on the top of the injector solenoid. Use ET (Electronic Technician) software to program this code into the ECM to ensure precise fuel delivery synchronization.

Troubleshooting Guide

Issue	Root Cause	Solution
Black Smoke	Poor spray atomization or stuck needle valve causing dripping	Inspect the air filter
Hard Start	Internal leakage in injector leading to insufficient starting oil pressure	Inspect injector O-rings and internal seals
Engine Misfire	Faulty solenoid valve coil or worn internal valve components	Inspect wiring harness connections and replace damaged injectors

Manufacturer Information

XKDE-01455 XKDE01455 Solenoid Valve for R210LC-7 Excavator 4

JIAJUE specializes in manufacturing high-quality industrial components with state-of-the-art production facilities and rigorous quality control processes.

Industry Exhibitions

Packaging & Shipping

All products are carefully packaged to ensure safe delivery and are shipped through reliable logistics partners for timely arrival.

Tag:

Place of Origin:	China
Brand Name:	jiajue
Model Number:	R210LC-7

Minimum Order Quantity:	1piece
Price:	25USD
Delivery Time:	1-3work days
Payment Terms:	T/T
Supply Ability:	1000PCS/MONTH

XKDE-01455 XKDE01455 Solenoid Valve for R210LC-7 Excavator

R210LC-7 excavator solenoid valve

XKDE01455 excavator valve

excavator solenoid valve replacement

pressure sensor valve,

water tank level sensor,

temperature sensor valve

31Q8-17821 31Q817821 Relief Valve for R210LC9 Excavator

102-8016X 1028016X Resistor for 320C Excavator

171-2208 1712208 Circuit Breaker Assembly for 311C Excavator

XKDE-01455 XKDE01455 Solenoid Valve for R210LC7 Excavator Parts

04236793 Stop Solenoid Valve for BF4L914 Engine

702-21-07610 7022107610 Solenoid Valve for PC200 Excavator

161-1703 1611703 Pressure Sensor for 324D Excavator

11N6-66030-24 Stop Solenoid for R210LC-7 Excavator