10R-4090 Controller ECU for C-12 Engine
High-quality replacement controller ECU part number 10R-4090 designed specifically for Caterpillar C-12 engines.
Product Specifications
| Product Name | Controller |
| Part Number | 10R-4090 |
| Brand Name | JIAJUE |
| Model | C-12 |
| Condition | Used |
| Availability | Rich Stock |
| Approximate Weight | 4KG |
| Size (per unit) | 40cm x 35cm x 15cm |
| Delivery Time | Usually delivered within 1-3 days after payment |
Product Images
Frequently Asked Questions
Installation Time for ECM on Machine
Physical Installation: 15-30 minutes. The unit is typically secured by 4 bolts on the cool side of the engine.
Programming & Testing: 30-60 minutes.
Pro Tip: If the ECM is pre-programmed by us based on your machine's serial number, it is essentially "Plug & Play." If not, you will need a Cat ET (Electronic Technician) tool to flash the software, which takes additional time. We recommend professional installation to ensure correct parameter synchronization.
Determining ECM Fault and Replacement Need
- The ET diagnostic tool cannot communicate with the ECM, or it displays a "Module Not Responding" error. This is a critical sign of internal hardware failure.
- Active fault codes related to internal memory (EEPROM) or voltage reference issues that persist after checking the wiring harness often indicate ECM failure.
- Sudden engine stalling, severe power loss (Limp Mode), or persistent misfiring (missing injector driver signals) after sensors and harnesses have been ruled out.
- Visible signs of overheating (burning smell), water ingress, corrosion, or broken pins on the connector headers.
Step-by-Step Testing Guide
Pro-Tip: HEUI (Hydraulic Electronic Unit Injection) systems are extremely sensitive to contamination. A single speck of dust can cause premature failure.
- Prepare: Ensure the excavator is turned off and safely secured. Disconnect the battery to avoid electrical accidents.
- Inspect: Check the ECU for physical damage or loose connections.
- Connect Diagnostic Tool: Use a diagnostic tool recommended by the excavator's manufacturer. Connect it to the ECU according to the tool's instructions.
- Read Codes: Use the diagnostic tool to read any error codes (DTCs) stored in the ECU. These codes indicate potential problems with the ECU or connected systems.
- Check Live Data: View live data parameters such as sensor readings and system voltages. Ensure they are within normal ranges.
- Functional Tests: If possible, perform tests to activate components or simulate sensor inputs. Verify that the ECU responds correctly without delays or errors.
- Reset (if needed): Reset the ECU if recommended by the manufacturer, especially after repairs or replacements.
- Document: Keep a record of all tests, codes, and results for future reference.
Quick Checklist for Buyers
Before replacing the ECM, always check the fuses, main relays, and ground connections. In many cases, a faulty ground wire or low battery voltage mimics an ECM failure.
Payment & Shipping Information
Payment Methods: T/T, L/C, PayPal, etc.
Stock Availability: Rich stock available.
Order Shipping: When the goods ship, we will share the tracking number. For sea or air freight, we can provide the bill of lading.
Company & Exhibition
Packaging & Shipping
Related Products
Il tuo messaggio deve contenere da 20 a 3000 caratteri!
