Name: 387-9432 3879432 Fuel Injector for C9 Engine E330D Excavator Spare Parts
Brand: GUANGZHOU JIAJUE TRADING CO.,LTD
SKU: E330D
Price: 50,000,012.00 USD
Availability: InStock

Detail Information

Part Number:

387-9432

MOQ:

Highlight:

C9 engine fuel injector

E330D excavator fuel injector

Diesel fuel injector with warranty

Product Description

387-9432 3879432 Fuel Injector for C9 Engine E330D Excavator Spare Parts

Product Overview

Part Name	Injector
Size (per unit)	20cm x 5cm x 8cm
Approximate Weight	1KG

Product Details

Product Name	Fuel Injector
Part Number	387-9432
Equipment Compatibility	330D Excavators
Type	Engine Parts
Place of Origin	GUANGZHOU
Brand Name	JIAJUE
Minimum Order Quantity	1 Piece
Condition	New
Availability	Rich Stock
Warranty	3 Months
Shipment	Dispatched within 24-48 hours

Product Testing

Related Products

Frequently Asked Questions

Q1: How do I install my fuel injector after purchasing it?

Please refer to the "Step-by-Step Installation Guide" on our product details page, which contains detailed installation instructions.

Q2: What precautions should I take before installing my fuel injector?

The installation environment must be dust-free; lubricate the O-ring with clean machine oil before installation to prevent oil leakage; ensure the O-ring is installed correctly.

Q3: Why is my engine still unusable after replacing the fuel injector?

This is common due to air trapped in the high-pressure oil rail. Cycle the engine in short bursts (no more than 30 seconds) to purge air. It may take several attempts to stabilize pressure.

Q4: Is my device compatible with this part number of fuel injectors?

If unsure about compatibility, please provide your Engine Serial Number (ESN) for free verification.

Q5: How to determine if your fuel injectors need replacing?

Cylinder Cut-out Test: Using diagnostic software (ET), shut off cylinders one by one and observe engine speed fluctuations to locate faulty cylinders.
Fuel Rail Pressure Test: Check for internal leaks preventing system from building critical starting pressure.
Back-leakage Test: Excessive back-leakage indicates severe wear of internal control valve assembly.
Visual Inspection: Inspect fuel injector nozzles for carbon buildup, blockage, or corrosion.

Q6: How long will it take to receive my package after payment?

Delivery time depends on your country, region, and customs clearance. Contact us with your address and postal code for shipping costs and estimated delivery time.

Step-by-Step Installation Guide

Pro-Tip: HEUI (Hydraulic Electronic Unit Injection) systems are extremely sensitive to contamination. A single speck of dust can cause premature failure.

1. Preparation: Clean the injector bores thoroughly. Ensure no carbon debris, old O-rings, or fuel/oil residue at the bottom of the seat. Inspect the injector sleeve for pitting or erosion.

2. Lubrication: Apply clean engine oil to the three O-rings and backup rings. Warning: Never use grease. Only use clean engine oil to ensure seals slide in without tearing.

3. Seating the Injector: Push the injector down firmly by hand until you feel it "seat." Install the hold-down clamp and bolt.

4. Torque Specifications: Tighten the bolt to 30 N⋅m±7 N⋅m (22 lb-ft). Note: Over-tightening can crack the injector body; under-tightening causes combustion gas leakage.

5. Trim Code Programming: Locate the 6-digit alphanumeric code on the top of the injector solenoid. Use ET (Electronic Technician) software to program this code into the ECM for precise fuel delivery synchronization.

Troubleshooting Guide

Issue	Root Cause	Solution
Black Smoke	Poor spray atomization or stuck needle valve causing dripping	Inspect the air filter
Hard Start	Internal leakage in injector leading to insufficient starting oil pressure	Inspect injector O-rings and internal seals
Engine Misfire	Faulty solenoid valve coil or worn internal valve components	Inspect wiring harness connections and replace damaged injectors

Company Profile

Exhibition

Factory Environment

Packaging & Shipping

Product Video

Tag:

Place of Origin:	CHINA
Brand Name:	JIAJUE
Model Number:	E330D

Minimum Order Quantity:	1
Price:	Please send mail or WhatsApp
Packaging Details:	387-9432 3879432 Fuel Injector for C9 Engine E330D Excavator Spare Parts is Packed in standard export packing under customer's requirement
Delivery Time:	1-3 Works day
Payment Terms:	L/C,D/A,D/P,T/T,Western Union,
Supply Ability:	1000PCS/MONTH

387-9432 3879432 Fuel Injector for C9 Engine E330D Excavator Spare Parts

C9 engine fuel injector

E330D excavator fuel injector

Diesel fuel injector with warranty

diesel engine fuel injector,

fuel injectors,

unit pump injector

10R-1814 10R1814 Fuel Injector For C12 Engine

10R-1256 10R1256 Fuel Injector For C12 Engine

4903084 Fuel Injector For QSM11 Engine

21028884 Diesel Fuel Injector for D13D Engine

557-7627 5577627 Fuel Injector For E325D Excavator

0R-9530 Fuel Injector 0R9530 Nozzle for C12 Engine

4002070 4002071 QSX15 Diesel Fuel Pump Metering Actuator

387-9432 3879432 C9 Engine Diesel Fuel Injector for 765B Truck