295050-0451 Fuel Injector for 6WG1 Engine
Produktdetails
| Teilenummer: | 295050-0451 | Mindestbestellmenge: | 1 |
|---|---|---|---|
| Hervorheben |
6WG1 engine fuel injector,diesel fuel injector 295050-0451,fuel injector for 6WG1 diesel engine |
||
Produktbeschreibung
| Product Name | Fuel Injector |
| Part Number | 295050-0451 |
| Brand Name | JIAJUE |
| Model | 6WG1 |
| Availability | Rich Stock |
| Approximate Weight | 1KG |
| Size (for 1pc) | 20cm x 5cm x 5cm |
| Delivery Methods | DHL FedEx TNT UPS |
| Warranty | 3 months |
| Shipment | Dispatched within 24-48 hours |
- Cylinder Cut-out Test: Using diagnostic software (ET), shut off cylinders one by one and observe engine speed fluctuations to locate faulty cylinders.
- Fuel Rail Pressure Test: Check for internal leaks preventing the system from building critical starting pressure.
- Back-leakage Test: Excessive back-leakage indicates severe wear of internal control valve assembly.
- Visual Inspection: Inspect fuel injector nozzles for carbon buildup, blockage, or corrosion.
- Preparation: Clean the injector bores thoroughly. Ensure no carbon debris, old O-rings, or fuel/oil residue at the bottom of the seat. Inspect the injector sleeve for pitting or erosion.
- Lubrication: Apply clean engine oil to the three O-rings and backup rings. Warning: Never use grease. Only use clean engine oil to ensure seals slide in without tearing.
- Seating the Injector: Push the injector down firmly by hand until you feel it "seat." Install the hold-down clamp and bolt.
- Torque Specifications: Tighten the bolt to 30 N⋅m±7 N⋅m (22 lb-ft). Note: Over-tightening can crack the injector body; under-tightening causes combustion gas leakage.
- Trim Code Programming: Locate the 6-digit alphanumeric code on the top of the injector solenoid. Use ET (Electronic Technician) software to program this code into the ECM for precise fuel delivery synchronization.
| Issue | Root Cause | Solution |
|---|---|---|
| Black Smoke | Poor spray atomization or stuck needle valve causing dripping | Inspect the air filter |
| Hard Start | Internal leakage in injector leading to insufficient starting oil pressure | Inspect injector O-rings and internal seals |
| Engine Misfire | Faulty solenoid valve coil or worn internal valve components | Inspect wiring harness connections and replace damaged injectors |
Produkt-Highlights
295050-0451 Fuel Injector for 6WG1 Engine High-performance 295050-0451 fuel injector designed specifically for 6WG1 engines, ensuring optimal fuel delivery and combustion efficiency. Product Specifications Product NameFuel Injector Part Number295050-0451 Brand NameJIAJUE Model6WG1 AvailabilityRich ...
262-2878 Steuergerät ECU 2622878 für C15 C18 Motorteile
262-2878 Controller ECU 2622878 For C15 C18 Engine Parts Product Name: Controller Place of Origin: GUNZGHOU Brand Name: JIAJUE Part Number: 262-2878 MOQ 1 Piece Condition: Brand New Availability: Rick Stock Supply Ability: 1000pcs Per Month Port: Guangzhou/Shenzhen/Ningbo/Shanghai Delivery Methods: DHL FedEx TNT UPS Payment Methods: TT, Western Union, Money Gram, Credit Card,Paypal Company Advantage GUANGZHOU JIAJUE MACHINERY PARTS is supplying your Genius, After
160-1758 1601758 Steuergerät ECU für Lastmaschine D6R
160-1758 1601758 Controller ECU For D6R Loader Product introduction Product Name: ECU Place of Origin: GUNZGHOU Brand Name: JIAJUE Part Number: 160-1758 Type: Excavator Parts MOQ 1 Piece Condition: Brand New Availability: Rick Stock Supply Ability: 1000pcs Per Month Port: Guangzhou/Shenzhen/Ningbo/Shanghai Delivery Methods: DHL FedEx TNT UPS Payment Methods: TT, Western Union, Money Gram, Credit Card,Paypal Product details pictures Related Products Company Profile GUANGZHOU
134-6553 1346553 ECU ECM-Steuerung für Radlader mit 120 H
134-6553 1346553 ECU ECM Controller For 120H Wheel Loader Product introduction Product Name: ECU Place of Origin: GUNZGHOU Brand Name: JIAJUE Part Number: 134-6553 Type: Excavator Parts MOQ 1 Piece Condition: Brand New Availability: Rick Stock Supply Ability: 1000pcs Per Month Port: Guangzhou/Shenzhen/Ningbo/Shanghai Delivery Methods: DHL FedEx TNT UPS Payment Methods: TT, Western Union, Money Gram, Credit Card,Paypal Product details pictures Product Testing Steps 1.**Prepare
243-3820 2433820 Monitor für C11-Motoren
243-3820 2433820 Monitor Panel For C11 Engine Product introduction Product Name: Monitor Place of Origin: GUNZGHOU Brand Name: JIAJUE Part Number: 243-3820 Type: Excavator Parts MOQ 1 Piece Condition: Brand New Availability: Rick Stock Supply Ability: 1000pcs Per Month Port: Guangzhou/Shenzhen/Ningbo/Shanghai Delivery Methods: DHL FedEx TNT UPS Payment Methods: TT, Western Union, Money Gram, Credit Card,Paypal Product details pictures Related Products Company Profile
Bitte nutzen Sie unser Online-Anfrage-Kontaktformular unten, wenn Sie Fragen haben, unser Team wird sich so schnell wie möglich mit Ihnen in Verbindung setzen.
